Tool Products

Coupling Connection with Ball Valve (1") - EZ Flow to Sprinkler System Tie In

1 in Coupling Connection with Ball Valve.jpg
1 in Coupling Connection with Ball Valve.jpg

Coupling Connection with Ball Valve (1") - EZ Flow to Sprinkler System Tie In

49.99

For Using EZ-Flow Fertilizer Injector With An In-Ground Sprinkler System

1” Coupling Connection with Ball Valve - Required for Low Flow Applications & HB Units for EZ-FLO Fertilizer Injectors

  • Ball Valve Coupling Connector with socket x socket connections for gluing into PVC pipe.
  • Manufactured from Schedule 40 PVC with 1/4" nylon barbed tubing connections.
  • Used to connect the EZ-FLO system to the irrigation flow line before or after the valve with the 1/4" flexible tubing provided with every EZ-FLO system.
  • They are required for complex system designs or when the elevation of zone valves downstream from the  EZ-FLO installation point are at an elevation of 10 feet (3 meters) or more above the installation point or where the user needs more control over the operation of the fertigation unit.  
  • Ball Valve Connectors provide the ability to adjust the differential pressure between the inlet and outlet connections to the irrigation flow line and can ensure that even the heaviest organic fertilizers and supplements can be pulled from the tank.
  • Ball Valve Connectors are also recommended for any application where higher feed rates are desired or heavier fertilizer/supplement products are used. This is especially important to nurseries and growers where higher proportioning rates are needed.

Ball Valve Coupling connectors are highly recommended for use with EZ005-FX and EZ010-FX models and REQUIRED FOR all High Capacity (HC) main line units.

Quantity:
Add To Cart
  • Manufactured from Schedule 40 PVC with 1/4" nylon barbed tubing connections.
  • 1" socket x socket connections for gluing into PVC pipe.
  • Length: 8 inches

Connection from EZ-FLO Unit